[[ImgSrc-search]]

Contact Us

Sales Manager: Justin Ning

Mob/Whatsapp: +8618825170534

Skype: justinning1

Wechat: meanlane

Tel.: +8618825170534

E-mail: meanlanegroup@163.com
Addr.: No.161/163,Genghe Rd.Genghe Town,Gaoming District,Foshan City,Guangdong Province, P.R.China

Home > News > Content
Cold Laminating Film Use
May 28, 2018

Folding regulator

1. Turn the pressure regulator handles on both sides of the machine to separate the upper and lower shafts. Place both the shaft and the cold film on the shaft and place the two shafts at the same time. Turn the pressure regulator handle so that the shaft is parallel to the shaft. Move, when the pressure regulator handle suddenly feels relaxed, it means that the upper and lower two axes have been in contact. At this time, please do not continue to press down, just gently tighten the pressure regulator handle. If you continue to pressurize, the shaft will be deformed and the operation will fail


2. After the pressure is adjusted, the figure between the two axes and the cold lamination film are withdrawn from between the two axes. Prepare for decidua.